FEA Solutions & Insights

Pipe Stress: 5 Things Managers Should Know

Written by Paulin Research Group | May 1, 2024 4:29:52 PM

Piping systems are the unsung heroes of industrial infrastructure, carrying fluids to the necessary places. But behind their seemingly simple function lies a complex world of engineering considerations, especially when it comes to pipe stress.

Pipe stress results from the forces and moments acting on a piping system due to its own weight, pressure, thermal expansion, and other external factors. Understanding pipe stress is crucial for ensuring the reliability, safety, and longevity of piping systems in various industries such as oil and gas, petrochemicals, and power generation. Here are the top 5 things you need to know about pipe stress:

1. Sources of Stress

Pipe stress can arise from multiple sources, including internal pressure from the fluid being transported, thermal expansion or contraction due to temperature variations, external loads such as wind or seismic forces, equipment vibrations, and support settlement. Each of these factors must be carefully analyzed and accounted for during the design and operation of piping systems to prevent failures and leaks.

2. Code Compliance

Compliance with industry codes and standards is essential in ensuring the safety and integrity of piping systems. Piping engineers have to ensure their designs comply with the standards and guidelines set forth by ASME and other bodies for the design, fabrication, installation, and maintenance of piping systems. Specifically, codes like ASME B31.1 are published for power piping and ASME B31.3 for process piping, to regulate production and ensure safety.

3. Stress Analysis Techniques

Various techniques are employed to analyze pipe stress and assess its impact on piping systems. Typical stress equations such as PR/t, F/A, M/Z are employed in most designs. Further, finite element analysis (FEA) is a powerful numerical method used to simulate and evaluate the behavior of complex piping structures under different loading conditions. Additionally, hand calculations, computer-aided design (CAD) software, and advanced engineering tools are utilized to predict stresses, deflections, and failure modes in piping systems. By conducting thorough stress analyses, engineers can optimize the design, material selection, and layout of piping systems to minimize stress concentrations and maximize performance.

 

4. Support and Restraint Systems

Proper support and restraint systems are essential for managing pipe stress and maintaining the structural integrity of piping systems. Supports such as hangers and anchors are strategically installed to distribute loads, prevent excessive deflections, and minimize stress concentrations at critical locations. Additionally, expansion joints and flexible connections are employed to accommodate thermal expansion and contraction without inducing harmful stresses on the piping components. By implementing robust support and restraint systems, engineers can effectively mitigate pipe stress and enhance the reliability of piping systems.


5. Lifecycle Management

Pipe stress is not a static phenomenon; it evolves over the lifecycle of a piping system due to changes in operating conditions, material properties, and environmental factors. So, proactive lifecycle management strategies are essential for monitoring and assessing pipe stress throughout the operational lifespan of a piping system. This includes routine inspection, maintenance, and integrity assessment (via software/tools) to identify potential stress-related issues, corrosion, fatigue, and other degradation mechanisms.


By adopting a lifecycle approach to pipe stress management, organizations can ensure the long-term reliability, safety, and efficiency of their piping infrastructure. Certain tools exist today that streamline this entire design and analysis process for piping designers and reliability engineers. Solutions like PCLGold accomplish this by automating FEA on local intersections, where engineers can optimize their designs more effectively, saving valuable time and resources. Additionally, PCLGold is designed to fill in the B31 code gaps like accounting for larger D/t ratios that aren’t covered well in B31.1 or B31.3. The program is better suited for handing refinery-lined piping and addresses critical system aspects like thermal cycling, Hazop studies, pressure design, and loads for rotating equipment loads. Further, k-factors and proper load distributions are automatically calculated and displayed on the model for the user, giving a full visual of the at-risk areas.

By leveraging such advancements, engineers can enhance the efficiency, accuracy, and reliability of piping system designs, ultimately leading to improved operational performance and reduced downtime. To learn more, access the complimentary brochure below.