Newbanner

 

FE/Pipe with PCL-Gold: Get FEA results without having to learn a new piping or FEA program!

Paulin Research Group - DOWNLOADS
HBar

If you would like a limited evaluation copy of PRG software, please download and completely fill out our
Software Evaluation Request Form and send it back to us at: sales@paulin.com. Our support group will then send you download instructions for the trial version of our software.

For answers to some commonly asked questions, please visit our FAQ page: FAQs

For technical documents related to the ongoing Research that PRG is doing in conjunction with the ASME ST LLC 07 02 and ST LLC 07 10 Code updates, please go to the bottom of this web page, or click HERE. These projects have been submitted to the ASME committees for review and are various stages of evaluation. PRG will provide updates on the progress of these reports and their expected inclusion in future Code updates.

Past Webinars and Online Videos (Past Webinars)
HBar

Paulin Research Group Introduces New Pipe Stress Capabilities in PCL-Gold

NozzlePRO: Added Features & Program Bundling for 2012

Fitness for Service (FFS) - Technical Review and Applications 

The ease and benefits of adding FEA results to your piping and pressure vessel designs -
Paulin Research Group & Intergraph Cadworx and Analysis Solutions Joint Webinar (1 of 3)

Examples that demonstrate using FEA Results with CAESAR II designs -
Paulin Research Group & Intergraph Cadworx and Analysis Solutions Joint Webinar (2 of 3)

Improving CodeCalc and PV Elite Results with Finite Element Analysis -
Paulin Research Group & Intergraph Cadworx and Analysis Solutions Joint Webinar (3 of 3)

Technical Articles
HBar

FatigueFatigue Image

Experimental Evaluation of the Markl Fatigue Methods and ASME Piping Stress Intensification Factors (July 2008)

Markl, SIFs, and ASME VIII-2 Fatigue Design (January 2008)

Fatigue Testing of Welded Flat Head Pressure Vessel Joints (July 2007)

Regression Analysis of Markl Girth Butt Weld Data (May 2007)

Items for Discussion Related to the Div 2 Rewrite Master SN Method (February 2007)

Observations Related to the Master SN Method in the ASME Division 2 Rewrite Project (February 2007)

Review of the Master SN Neuber Rule in the ASME Division 2 Rewrite Project(February 2007)

Update on Fatigue Testing at Paulin Research Group (November 2006)

Fatigue Testing and Life Estimates of Welded Flat Head Pressure Vessel Joints(July 2006)

Pipe StressBranch Image

Stress Intensification Factor (SIF) & Pipe Stress Checklist (2008)

Evaluate stresses from Ansys®, CAESAR II® or any other program for fatigue, high temperature or fitness-for-service.  (2008)

Experimental Validation shows that FE-107 Provides More Accurate Results than WRC-107 (2008)

Pipe Stress Errors - When You're Off by 10 Times! (January 2008)

What if the SIF is Not Accurate? (January 2008)

What is a Stress Intensification Factor (SIF)? (January 2008)

Which WRC 107/297 Parameters Should I Check and When Is My Geometry Valid for a WRC/297 Analysis? (January 2008)

Use SIFs and Flexibilities in CAESAR II® (January 2008)

ST LLC 07 02 and ST LLC 07 10 Technical Documents
HBar

2011 ECTC Proceedings - Revision of B31 Code equations for SIFs & k-factors for Intersections

PRG Presentation - ASME ST LLC 07-02 Recommended Changes to Appendix D